2026 — Embedded Systems / Operating System

Pocket OS

Custom OS for a pocket device

A pocket-sized ESP32 device with its own menu-driven OS and a toolbox of Wi-Fi and Bluetooth tools. It runs on three buttons and a small color screen, from signal scanning to a BLE keyboard remote.

C++ArduinoESP32Wi-FiBLERGB565 Display
POCKET OS● LIVE

WIFI

Connected

SCAN

Waiting, open networks…

Screen mockup — real photo coming soon

Specifications

PlatformESP32
ConnectivityWi-Fi + BLE
Input3 buttons (NEXT / SEL / PWR)
DisplayColor, RGB565, landscape or 180°
LanguageC++ (Arduino)
StatusIn Progress
Year2026

Key Features

Wi-Fi Toolkit

Connect to the strongest saved network, view link info (IP, gateway, DNS, live RSSI, channel, MAC), scan nearby networks, and see which of channels 1 / 6 / 11 is the quietest.

Walk to Find

Select a network or BLE device and follow a single bar that fills as you get closer, a simple way to hunt down a signal.

BLE Tools

Scan for nearby devices, advertise a beacon named NEOSTICK, or act as a Bluetooth keyboard remote with Slides (Left / Right) and Volume modes.

Packet Counter

Shows frames per second while hopping all channels or locking one. It counts frames only and never keeps addresses or contents.

Setup Without Reflashing

Opens an access point called NEOSTICK at 192.168.4.1. Up to four networks are stored on the device, and passwords are typed on the setup page, not kept in the sketch.

Lock Screen Clock

A clock synced over NTP after joining Wi-Fi, set to IST-5:30 by default and changeable with TZ_INFO in config.h.

Controls

NEXTMove the highlight, or the “up” action on a tool
SELOpen, confirm, or the “down” action
SEL heldDeep sleep. Press NEXT to wake
PWRLock screen. Any key unlocks

The lock screen appears on its own after the saver time (30 seconds by default). Sleep stays off until you turn it on in Settings, so a USB session is not cut short.

Tools

▸ FlasherFull-white torch. Select turns it off.
▸ Wi-FiConnect, link info, scan, channels, setup, packets
▸ BLEScan, beacon, keyboard remote
▸ TimerStopwatch or 1 to 60 minute countdown
▸ SettingsBrightness, saver, sleep, boot target, rotation
▸ SystemHeap, uptime, CPU frequency, die temperature, flash, reset reason
▸ AboutBuild name, radio and version

Design Language

The device draws in 16-bit RGB565 color. This palette also became the theme of this portfolio.

Background#0000000x0000
Panel#0808080x0841
Live state#5af7e60x5FBC
Labels#29ceb50x2E76
Waiting, open networks#ffa6000xFD20

Status

In Progress

View on GitHub